fire alarm
Fast. Friendly. Dependable. Done.
From design and installation to troubleshooting and repair, Garber Connect is your single source solution for fire alarm systems. Our goal is to ensure that the optimum solution is developed and operational, when you need it.
- Fire Alarm Design
- Fire Alarm Central Station Monitoring
- Consulting
- Project Estimates
- Turnkey Installation
- Maintenance and Repair
- Product Leasing
- 24-Hour Emergency Service
- Inspections and Testing
- Emergency voice evacuation and communication system
- Service Agreements
Frequently Asked Questions
Treat all fire alarms as if they are real, proceed to the nearest and safest exit and wait for instructions by your local authority.
On a typical annual inspection every fire alarm device is tested for proper operation. Our inspection report details all inspected equipment.
Most of the time your fire alarm control panel should be silent, if you are experiencing frequent audio alerts you may need to contact Garber to determine the cause of the problem.
Garber recommends replacing the battery on a 3 year interval. Some components on wireless systems may have batteries that need to be replaced on a more frequent basis.
In most cases yes, all newer systems installed in the last 15 years or so, are required to be monitored. If you have an older system that is not monitored, you may have been grandfathered. However, Garber recommends all fire alarms to be monitored.
